If you are not happy with the results below please do another search
Yes we have a Punisher Tail for the Vision. This tail will allow you to keep your dual pipe set up. Sides of bags are angled for clearance. Uses factory hardware to install. Kit comes complete with cage to install tail, bags, rear fender , stretched side panels, and seat pan. You will need to […]
We only use stock Victory paint base, pearl, and clear. Please provide VIN for color match. *We cannot be responsible if your bike is faded, and your newly painted part does not match your faded bike. Front Fender $ 450.00 Front Fender w Big Wheel Kit purchase $ 350.00 8.8″ Speaker Lids $ […]
HMD’s NEW Tail.. THE ROCKSTAR. This thing is wicked.. give your bike that stand alone look you have been waiting for. The bags are stretched back and down, with a slant at the bottom of the bag so you can ride slammed. NO need for to look for addtiional lighting… just take your factory tail light and flip it upside down … its that easy! These are direct replacment parts. Primed and ready for paint.
We now offer the “BUILDERS KIT”. This kit comes with Rear Fender, Bags, Saddle Bag Mounting Hardware, and Bag Brackets (4 large boxes).
You can choose add the following optional parts by clicking the links below:
This product may require minor finishing before paint. We recommend you mock this part up for test fitting before paint.
Fitment may require adjustments.
Designed for professional builders.
PRICE DOES NOT INCLUDE SHIPPING
This is the strongest tour pack bracket on the market. Made from 3/16TH steel.
RUN, BRAKE, & TURN – ALL IN ONE SLEEK PLASMA RODS! Dual Color Plasma Rods™ use a patented LED technology that produces a bright, incredibly smooth light output unlike anything you have seen before. Plasma Rods™ can be used about anywhere but they work great as additional running, brake and turn signals located between your […]
**FIBERGLASS PARTS ARE MADE TO ORDER, AND CONSIDERED SPECIAL ORDER. PART MAY SHOW AS BACK-ORDERED…ONCE YOU PLACE YOUR ORDER, PARTS WILL BE PUT IN THE QUEUE, TO BE MADE**
**FIBERGLASS PARTS ARE MADE TO ORDER. PART MAY SHOW AS BACK-ORDERED…ONCE YOU PLACE YOUR ORDER, PARTS WILL BE PUT IN THE QUEUE, TO BE MADE**
The Punisher Tail, designed for dual pipe application. The bottom of the bags are angled so you have more clearance and can ride slammed. Made from the top grade marine resins. Our bags are the first of their kind in the industry to have the upper lips around the top of the bag JUST LIKE […]
HMD–Vision Rake Kit–Installation Sheet
Warning & Disclaimer: All parts sold are for OFF ROAD use only! To achieve Maximum Performance
Safety and Reliability all parts must be installed by a Professional Technician and used on a closed course.
We hold NO RESPONSIBILTIY for the misuse or improper assembly, installation or usage of any performance related products that we sell. You must follow the guideline and installation sheet for optimum performance and safety.
****THIS KIT IS NOT TO BE USED WITH AN 18” WHEEL****
1 You will need to use a scissor jack (or a jack) to lift the front of the bike. Once you have the front wheel off the ground you can proceed to remove the front wheel and fender.
2 Remove gauge bezel and center console.
3 We recommend you cover the body panels with tape or a sheet to prevent any scratching. Remove handlebars and place to side.
4 Remove the forks from both sides.
5 Remove fork cap. Remove fork oil and replace with 30 wt fork oil. THIS IS MANDITORY!
6 Loosen top bolt on upper tree. Now remove the upper tree. Once you have this removed you can remove the spin lock nut by using a screwdriver and a hammer. Slightly tap the lock nut counterclockwise. The tree will slide out the bottom.
7 Remove bottom race and top bearing in neck.
8 Assemble top and bottom trees with provided bearing races, and seals, use a waterproof synthetic grease to pack the bearings.
Note: Failure to use the provided bearing assemblies will result in improper installation of the trees.
9 Insert the 5/8 hardened stem bolt and flat washer through the top of top tree. Thread the bolt into the bottom tree assembly by hand until you are sure that the bolt is started straight. Tighten the stem bolt until there is no play in the trees. Now back the stem bolt off a 1⁄2 turn. This allows easier assembly of the forks into the trees.
10 Insert the left and right forks into the trees. At this point, hand tighten the top pinch bolts to prevent the forks from slipping out.
11 Assemble the front-end, handlebars, wheel, and fender.
12 Now set the bearing preload of the trees, using a precision torque wrench tighten the stem bolt to 14 ft/lb.
Note: Over tightening the stem will result in poor handling.
IMPORTANT: Lock the stem bolt with the 6mm set screw. The set screw, threads into the top of the front tree.
13 Torque all pinch bolts to 35ft/lb. It is recommended you do not use any thread lubricant or locktite on any threads.
Note: It is extremely important to loosen the locking setscrew when making adjustments in bearing preload. When preload has been adjusted make certain to retighten the setscrew.
14 Assemble the rest of the bike.
15 It is recommended that the tires be inflated to manufacturers maximum pressure, and maintain the tire pressure.
WARNING
Installation of this product will alter the handling of your motorcycle This product is intended to improve the look of your motorcycle
A qualified motorcycle mechanic should perform the installation of this product. HMD520 shall not be held liable for inconsequential damages caused by improper installation of this product or consequences caused by the rider obey all traffic and speed laws, and always wear protective gear when riding
23″ Big Wheel Kit
$3579+ Shipping **(ABS+$200)
**We will manually add the price, next to your wheel choice, to your total. Price shown is for Elite series wheels. Signature and Pro series wheels will show additional cost next to them, in the drop down list.
Kit includes wheel/tire/rotors, Game Changer rake kit, steel wrap fender, fender spacers, and lowering link of your choice.
23â Wheel: You will need to change the fork oil to 20 WT
a) If you install a 23â wheel, you must install our 1â lowering link (HMD-01) for the rake kit to work safely. It was designed to work in conjunction.
b) You can install our 2â lowering link (HMD-02) which is a combo link, with this rake kit, or air ride.
***WHEELS MUST BE BALANCED PRIOR TO ROAD USE***
We can balance your wheel, prior to shipping by adding Balance Wheel to your cart.
Add options to cart by clicking links below:
**ALL WHEELS TAKE 30 DAYS TO BUILD**
WHEEL CONFIGURATION